General:
- added option to change font size of file table
- improved mouse selection model in SyncExplorer
- IzPack installer updated
- added diff feature in SyncExplorer
Bug fixes:
- workaround for FTP library bug (see commons net ftp bug NET-188) (reported by Mihai Dobrescu)
- fixed bug to check connection state in FTP
- fixed bug in file transfer if connection gets lost just before the transfer starts
- fixed bug [1912764]: file corruption due to faulty JRE API on Windows
Version 0.8.3
General:
- added -c (--config) option which can be used to set the path to the configuration files of Capivara
- added warning if case insensitive sync is enabled and 2 files in one directory are found with caseInsensitiveName(f1) = caseInsensitiveName(f2), e.g. fileXYZ and filexyz
- made duplication finder a property of a connection (removed global button)
- added support for HOME/END key in file viewer
- updated SSHTools to 0.2.9
- updated JSch to 0.1.34
- revised file transfer cancel code in SSHTools and JSch plug-in
- added noop as default sync direction
- password authentication handling in JSch plugin improved
- added status bar at bottom of UI
- shortened delay when opening internal viewer
- fixed font problems using GTK widgets
- added permission handling in FTP plugin
- added file synchronization by name and size
- [sync] fixed case insensitive bug : enabled option 'case insensitive' can lead to incorrect comparison results (sort function was still case sensitive)
- [gnu plugin] fixed change directory bug, a manual change of the current directory could fail even if it is a valid path
- [options dialog] changes in options dialog could not automatically be saved due to a wrong path to the configuration file
- [gui] fixed a problem with copy dialog artifacts using Gnome
- General:
- Massive clean up and refactoring
- Added duplication finder - Bug fixes:
- Changed selection model in SyncExplorer, click on right mouse button will also change the currently selected file
- General:
- added Italian translation - Bug fixes:
- General:
- Bug fixes:
- fixed file filter support which were broken in 0.8.1
- General:
- added detection of supported encoding by JVM
- added selection of control encoding in FTP plugin - Bug fixes:
- fixed bug [1559100] host combo loses input
- fixed "too many open files" bug while recursively setting permissions
- General:
- Added support to select an encoding when opening a connection
- Added font utils for determining font metrics
- Added UTF-8 support for FTP connections
- Added additional SFTP plugin (jsch)
- Added bidirectional synchronization option for time syncs
- Added case insensitive synchronization option and case insensitive file system support
- Added option panel that lists Capivara's key bindings (shortcuts)
- Rewrote locale handling, new/updated locales can now be dynamically loaded from
directory .jfilesync/locales/ in the user's home directory
- Added: look and feel settings can now be saved and restored
- Added: option to set the length of the hostname in the tab title
- Added ChangeLog option to About menu
- Added shortcuts (mkdir - F7)
- Added scroll bars to list of favorites - Bug fixes:
- UTF-8 font display problem in SyncExplorer
- symlink target detection for FTP/SFTP plugin
- "Too many open files" when collecting files using the GNU plugin
- synchronization stalls when Capivara tries to copy files that contain
corrupt properties (e.g. modification times)
- NullPointerException when reloading a directory and ".." is selected
- delete dialog is shown even if only ".." has been selected
- changed height of textfields in status line when using GTK look and feel
- synchronization is immediately aborted when a file cannot be deleted
- file system root (c:,e:) on Windows may not be updated correctly when the user presses the home button or enters a bookmark
- General:
- Added Traditional Chinese translation (Kuang-Chang Lin)
- General:
- Sync preview components have been revised and polished.
- Added Polish translation (Grzegorz Blonski)
- Action events (enter, escape) enabled in file rename dialog .
- File viewer selection model revised and improved.
Selection is kept when table is reloaded.
- Bug fixes:
- Fixed file copy bug on Windows.
- Quick connect dialog (popup trigger on connect button) doesn't work
on Windows.
- Quick connect doesn't work for right pane browsers.
- File viewer update. Large files are loaded much quicker.
Added close frame event (default F3).
- General:
- Added Japanese translation (Yasuo Tsuruha)
- Added quick connect option. User can quickly connect to his favourites. (right mouse click on the connect button (Windows/Linux/Unix))
- Added FAT time workaround for all connections.
- Massive speed improvement through an update of the file collecting algorithm. It's now completely multithreaded as collecting files is performed on both connections concurrently.
- Added directory bookmark handling. A user can save his favorite directories and revisit them later quickly.
- Code revision. - Bug fixes:
- Fixed. Bug in copy progress monitor. GUI thread does not sleep as expected and hence, it consumes far too much CPU time which makes the copy process slower.
- Selected filters have not been applied to all files in the synchronziation tree.
- Fixed FTP related problems. Rewrote code to determine if a file exists.
- Fixed. Backward compatibility problem with user selected translations that didn't exist in older releases.
- General:
- Added French translation (Charles Duysinx)
- Upgrade of ftp plugin: from commons net 1.4.0 to 1.4.1
- Added file filter support in synchronization.
- Subsequent error messages in a copy or sync process can be ignored.
- Support for Socks proxy (4/5) in ssh plugin.
- added patched version of SSHTools (0.2.9.1-sahu)
- added command line option 'gnu' as replacement for 'local' - Bug fixes:
- Connection dialog update: host prefix combobox revised
- FTP plugin: cancelling of put/get
- Insert a leading zero in minutes at "estimated time to finish" when
hours>0 and minutes<10
- Capivara detects corrupted configuration files and handles this problem.
- Fixed. NullPointerException when performing a hash compare using a remote connection.
- GnuPlugin. Links to directories get properly resolved and dereferenced.
- TLocal_plugin. Link detection revised and corrected. Thanks
to Ralf Hoffmann for his help.
- SSHTools: 0.2.9.1 fixes problems with UTF-8 encoded file names
- Collecting files for sync aborts when some file cannot get opened.
Now the user can decide if he wants to add this restricted file to the
exclude list. Synchronization of restricted directories is therefore also
possible.
- When changing to a parent directory on a remote connection (SFTP/FTP) the child directory that we are coming from was not selected (Windows).
- General:
- Updated Chinese language pack (Joel)
- Updated Brazilian Portuguese language pack (Sergio Henrique)
- Replaced labels of synchronization dialogs by their locale representation.
- Deleted all deprected classes. Code cleanup.
- Massive speed improvement for constructing the synchronization tree. Before, the tree builder computed SHA-1 and MD5 hash sum for all files disregarding if files are already marked as unique. Now, it does only compute the hash code when a file is not unique and the corresponding file has the same file size. - Bug fixes:
- Skipping an existing file or directory will result in unprecise copy statistics.
- Copying a directory without having write permissions causes the copy thread to fail. The newly created directory is already given new permissions before files have been copied into. Subsequent attempts to append files will fail.
- When option "open a directory with a single mouse click" is enabled, the user is unable to select directories. Fixed. User can now hold down CTRL and click mouse button1 to select directories.
- LinkExistsDialog contains a method that is only available for JDK5. This method has been replaced in order to guarantee full Java 1.4.x compatibility.
- General:
- Added option "expert mode", if disabled: user cannot sync with SHA-1/MD5 using remote connections, GNU plugin not available
- Added hotkeys: C+n rename file, F3 start viewer
- Added option: always exit without prompt when closing Capivara
- Changed dialog which controls saved favourites. Only favourites for remote connections may be saved.
- Added: Choosing a port for remote connections.
- Added GNU plugin which is a replacement for the local plugin on Linux machines. It works with any Unix like system that uses the GNU ls command. The plugin is based on GNU ls (list directory contents). So, the file informations such as name, size, permissions etc. are taken from the GNU ls output.
- Selection behavior of entries in file table changed. When a directory gets listed in another panel, the keyboard focus will stay in the currently active panel. (Nice small patch by Ralf Hoffmann)
- Bug fixes:
- fixed: Storing a file on FTP servers damages the target file when target has same name.
- fixed: Infinite loop: Another connection with this name already exists
Version 0.7.1
- General:
- Scrollbar behavior changed when changing to a parent directory which has
more entries than the filetable can display.
- Bug fixes:
- fixed: directory permissions are not preserved
- General:
- added new keystrokes (see the howtos)
- added Chinese language pack (thanks to Joel Gump)
- Copying from a remote directory to a remote target is now completely
transparent to the user. Only accumulated statistics of both operations,
put and get, will be shown.
- Complete rewrite of the file copy classes (+statistics).
Copying and syncing share one code base now. As a result, the sync progress
dialog can retrieve statistical data of files which are transferred.
- The user can now choose to delete incomplete files in case of IO errors.
- Bug fixes:
- fixed: file copy option "preserve permissions if available" is not saved
- After the user has cancelled the file transfer, the user gains control
when the copy thread finally exits.
- The local plugin throws IOException when a file cannot be deleted and
exits. Now, a confirmation dialog will be prompted to continue deleting files.
- Bug fixes:
- possible deadlock when collecting file trees for synchronization
- MD5 sums were reported as SHA-1 sums when they differed
- General:
- added synchronization support for SHA-1 and MD5
- added cancel button to status line, user can now cancel current worker threads
- the last visited directory will be automatically selected when
the user goes up in the file tree
- added new dialog with stats/progressbar for comparing two directories (sync)
- added workaround for FAT timestamps (virtual change of resolution, sync),
thanks to Ralf Hoffmann for code improvement
- added deletion status panel, when deleting files takes too long, the user
can now cancel the operation
- added new worker GUI model, GUI components now plug dynamically into the
corresponding panel when a worker is executed - Bug fixes:
- fixed focus bug when hitting tab after startup
- changed non thread-safe TFileDataCollector (did not propagate IOExceptions) for DataCollectWorker in SyncTreeBuilder
- changed DataCollectWorker to pass all occurring IOExceptions to its caller
- General:
- FTP plugin can now list hidden files. Changed LIST command to "LIST -a"
in FTPCommand of commons.net.
- new options for synchronization view: hide/show files and directories
- Bug fixes:
- fixed: deletion of files failed while syncing
- General:
- added file permissions handling for SFTP
- added file size view in bytes
- added option to show only the difference of sync trees
- added patched version of SSHTools (0.2.9-pre1) - fixes file permission handling
- Bug fixes:
- preserve modification time works on directories
The SSH_FXP_SETSTAT does only need to contain the changed attributes.
use FileAttributes attr = new FileAttributes(); instead of
FileAttributes attr = sftpClient.stat(file);
- fixed size of override dialog for German
- General:
- added plugin options
- added Key Authentication for SFTP plugin
- added protocol information in status bar
- added command line options (thanks to Ralf Hoffmann for his support)
- added patched version of SSHTools (0.2.8)
- Bug fixes:
- Focus problem in DataTable seems to be solved now. DataTable does not loose focus when the directory is changed for Java Swing binding.
- SSHTools patch: key exchange after transferring 1 GB will cause disconnect
- SSHTools patch: can now be compiled with Java Tiger
- General:
- cleaned up images and reduced color maps and size
- Bug fixes:
- language selection dialog at program start works now with JDK 1.4.x
- General:
- substituted log4j logging code with java.util.logging
- code refactoring - rewrote parts of code to get a clean plugin model for connection plugins
- OptionDialog lists available connection plugins
- added command line options --nosplash, --left, --right, --help- added option "preserve modification time"
- implemented option "double click opens directory"
- implemented option "confirm open editor for file larger than"
- adjusted the size of JTextFields to look pretty on Windows - Bug fixes:
- synchronization is now possible in root and first level directories (/ or /home)
- changed focus traversal policy in ConnectionDialog
- time synchronization did not work as expected when the files on left panel were newer than the files on the right
- time synchronization option: copy only newer files
- fixed theme path bug on Windows (file separator)
- fixed bug of allowing to select files on either side at the same time
- fixed bug in sorting file sizes
- fixed bug in ConfirmOverrideDialog
- tabbing implemented
The user can now connect to more than 2 servers at the same time.
- code redesign, actively waiting threads (syncer) have been changed to support a proper wait/notify mechanism
- fixed bug in jar archive
The jar archive of version 0.3b which was available for download on sourceforge.net contained a corrupt MANIFEST file. The application could not be started since the java runtime couldn't locate all necessary classes. This problem has been fixed. Sorry about that!
- keymap framework implemented
In future it will be possible to customize the user's key mapping.
- fixed bug in ConnectionInterface.rename(..)
- converted all long lasting tasks to GUI workers.
Capivara is now completely multi-threaded - no frozen GUIs anymore. - created installer package with IzPack (http://www.izforge.com/izpack/)
